Без рубрики

StepbyStep Guide to Prepare for Dental Crowns and Bridges

  • By celia barrymore
  • Published 02/6/2013

Whether you need to cover up a weak or fractured tooth with a dental crown or fill in a gap between teeth with a dental bridge, you need to understand the process in which these prosthetic devices are made. This will help you prepare for what to expect during your dental treatment. Here is a step-by-step guide to how these prosthetic devices are made.

Step 1: The dentist prepares the tooth for the crown or bridge. Before the dentist can place either of the two devices, he/she must ensure that they will fit over your existing teeth. For this, he/she needs to reduce the size of the tooth over which the crown will be fitted or the abutment teeth that will anchor the Pontic.

Step 2: The dentist takes an impression of your teeth, gums and bite. To create appropriate dental crowns or bridges, the dentist needs this impression. This is taken on soft material to ensure accuracy of this. Dentists may also use computer tracings and graphics for this purpose.

Step 3: The dentist matches the colour of the crown or bridge with the natural colour of your teeth. The closer the shade of the dental crown or bridge to that of your teeth colour, the better the aesthetics. However, keep in mind that this is possible only when the crown is made from porcelain.

Step 4: The dentist fixes a temporary crown or bridge over the prepared tooth. Creation of the false caps and bridges takes time. However, it is not a good idea to leave the teeth as it is. To cover up the prepared teeth, the dentist places a temporary crown or bridge over these to ensure protection.

Step 5: The dentist sends the mould to the laboratory. The preparation of the dental crown and dental bridge requires expertise. After the dentist sends the impression of your teeth, gums and bite to the dental laboratory, the experts there will create the prosthetic devices as per the recommendations of the dentist.

Step 6: The dentist fits the permanent crown or bridge on your next visit. After the dental laboratory completes the creation of the dental crowns or dental bridges, you need to go for a second visit to the dentist. During this visit, the dentist may cement, temporarily or permanently, the devices onto your teeth.

Step 7: The dentist may need to adjust it later. If the dentist fits the crown or bridge over your teeth temporarily, you may need to go for another visit later to get a necessary adjustment. After the dentist and you are satisfied about the position of the prosthetic device, he/she may cement it in place permanently.

Improving the appearance of your smile is possible with the use of the right prosthetic devices for covering up weak or broken teeth and for replacing missing teeth. However, you need to make sure that you choose a dental clinic that specialises in these treatments. Only such a clinic can ensure the rectification of the imperfection that affects your smile. 

Author Bio

Celia Barrymore is an orthodontic expert. She provides a brief overview of the ways in which cosmetic dentistry treatments may enhance your smile. She suggests the use of orthodontic devices such as lingual braces for teeth straightening and prosthetic devices such as dental bridges for replacing missing teeth. She also advises you to find out every relevant detail regarding the treatment, such as dental crowns and dental bridges cost.

Share:

Related Posts

Menu